Product name: BTT-NY4150 non-asbestos rubber fiberboard

product description:

The products mainly use nitrile rubber and natural rubber as adhesives, non-metallic materials as fillers, and organic and inorganic fibers as frames. Rolled by a sheet forming machine.

The non-asbestos board is made by wet method, therefore, a lot of light fillers and dust will be scattered in the water, so that there is no dust in the air. The dust-free production in the workshop not only saves raw materials, but also ensures the physical and mental health of employees. The edge material of the non-asbestos copy board is a kind of renewable capital and can be reused. When the sheet is made into a gasket, 50% of the remaining material will be produced. Reuse can save 50% of capital and create unlimited social and economic benefits.

Conventional colors: blue, green, other colors can be customized.

Specification size: 1520*4100mm, 1520*4580mm, 1270*3810mm, can be cut into small pieces

Conventional thickness: 0.4-5.0mm, boards above 5.0mm can be bonded

Since the non-asbestos fiber is a solid structure, the sheet material is getting denser and the sealing effect is very good, which reduces the phenomenon of dripping and dripping, saves electricity and reduces air pollution. Non-asbestos paperboard is continuously produced by Fourdrinier, which consumes 700 kWh of electricity and 2 tons of coal per day. Continuous production 24 hours a day can save 1 ton of coal and more than 200 kilowatt-hours of electricity; drum vulcanization uses steam generated by a boiler to vulcanize. Save electricity bills.

Non-asbestos rubber fiberboard performance parameters index: transverse tensile strength ≥4.5Mpa, leakage rate ≤1.0ml/min, compression rate 7-17%, rebound rate ≥30%, qualified oil resistance, higher instantaneous temperature resistance 150℃, Continue to use the temperature of 100 ℃.

Inspection standard: Rolling method non-asbestos fiber gasket (JC/T2052-2011)

As far as the gasket workshop is concerned, the cleaning section uses the distilled water produced by the non-asbestos production line boiler to clean, which not only cleans but also saves water sources. When manufacturing abrasive tools, composite abrasive tools should be used to make full use of the original materials when stamping. It also saves manpower and electricity; there are many drying racks in the screen printing process, and use natural air drying, thereby saving electricity costs.

In terms of water use, the water produced in the production workshops of non-asbestos board manufacturers is filtered and collected, treated and reused, and basically not discharged. The main water used in the gasket workshop is purified water, which is recycled to the non-asbestos board workshop for pulping and recycling. Coal is also used. When the boiler exhausts flue gas, a dust collector will be used. After passing through the sedimentation tank, coal slurry is formed and dried for reuse. The steam produced by the boiler can not only meet the requirements of pulping, drying and vulcanization, but also has a satisfactory cleaning effect.

Remarks: The product can be coated with graphite and anti-sticking agent according to customer requirements, and metal wires can be clamped with a thickness of 0.8mm or more; gasket materials with a thickness greater than 3.0mm are not subject to transverse tensile strength test; gasket materials reinforced by wire mesh are not Do transverse tensile strength and nitrogen leakage rate tests.